Fiber laser has higher speed in metal sheets cutting, especially in thinner metal sheets cutting below 10mm. The running cost and electricity consumed by fiber laser are lower than CO2. And the technical skills required for the operators for fiber are lower than CO2.
We have power from 700W to 15,000W. With different power, we can cut different thicknesses or the same thicknesses with different speeds. You can tell us the most common materials you cut and the maximum thicknesses of them, and we will recommend the most suitable power for you.
The main brand we are using in IPG from Germany. And we are also using Raycus, the biggest brand in China.
The fiber laser cutting machines should work with oxygen, nitrogen or compressed air. What gas to apply will depend on the materials types and your cutting requirements. We will have cutting parameters for different power and different materials, with speed and gas to apply shown.
You will need to tell us your cutting requirements, such as types of metal, thicknesses of each type of metal, the table size you need, and you need to cut metal sheets or metal tubes or both?
The standard size is 3000*1500mm, and we can go bigger to 4000*1500mm, 4000*2000mm, 6000*2000mm, 6000*2500mm or even 12000*2500mm, and we can go smaller to 600*370mm and in the future 1300*900mm.
Normally we don’t provide OEM service or custom-made machines. But if you have this request, you can consult us with your proposals and requirements.
We can provide the customers with the free testing of their materials. And you can also offer us your cutting drawings. Our engineer will test the best result of cutting. The testing parameters, detailed pictures, testing report and video can be sent for your reference. If needed, the tested material can be sent back to you, and its shipping cost should be borne by you.
The whole machine has one years' warranty. In case you meet any problems of the machines, you can send us photos and videos to show the problems, and we will build a chat group to analyze the problems for you. Problems will be normally found out and fixed within 24 hours. If any parts needed to fix the problems, we will send from stock timely. And for some high-cost parts, we will need customers to send back for us first.
FOB, CNF/CFR and CIF are all acceptable.
30% deposit, 70% balance before delivery by T/T is preferred. For more urgent delivery, 100% deposit in advance before production is necessary.
Delivery time will be from 20 to 60 days, sometimes even longer. It will depend on which model you choose. For some standard models and urgent cases, we can deliver within 10 days if 100% payment will be arranged in advance before shipment.
We will use seaworthy wooden case with vacuum film, tinfoil and metal frame inside. What types and how many pieces of containers needed will depend on which model you will choose. Sometimes we will need to use 20FR or even 40FR containers for wider machines.
We will send a technician to your side at your cost to set up the machine and offer training for about 7-15 days depending on different models. Round-trip air tickets, accomodation, board and other possible fee at your place will be borne by you, and salary of our technician will be borne by us.
We will have a complete set of manuals for you as service materials, including Unloading guide, Installation Guide, Machine User Manual, Software User Manual and Maintenance Manual.
This service will be available. Reasonable costs for sending engineers will be charged.